LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Lubrication, Oil Cooling - 140 Chassis) >> Testing & Repair >> Replacing oil pump chain - AR18.10-P-2140 >> Replacing oil pump chain - AR18.10-P-2140HW >> Separating oil pump chain - AR18.10-P-2140-01HA

Separating oil pump chain - AR18.10-P-2140-01HA

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODIFICATION NOTES

6.5.96 Special tool modified and incorporated Procedure modified See step 1-6  
Fig 1: Case (602 589 00 98 00)
G04631806Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Thrust Spindle (602 589 05 63 00)
G04631807Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 3: Chain Separating Tool (602 589 02 33 00)
G04631808Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 4: Thrust Pins (602 589 05 63 01)
G04631809Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Bolt in pressure screw (02) with pressure pin (02a) into chain-separating tool (03).
  2. Position chain separating tool (03) against oil-pump chain.

    IMPORTANT Position chain separating tool (03) onto oil-pump chain bolts (arrow).

  3. Turn in pressure screw (02) until pressure pin (02a) makes contact with oil-pump chain bolts.
  4. Screw in pressure pin (02a), press out oil-pump chain bolts (arrow).
    Fig 5: Separating Oil Pump Chain
    G04631810Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  5. Unscrew thrust spindle (02), take off chain separating tool (03).
  6. Pull removed oil-pump chain bolts (1) out of chain separating tool (03).
    Fig 6: Removing Oil Pump Chain Bolt From Chain Separating Tool
    G04631811Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals