Removal and installation of the charge air pipe - ra14006021310x(1310)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Engines 602.96 603.96/97 TURBO Model 463.3: for deviations see introductory notes)
Preceding work:
Operation no. of operation texts and work units or standard texts and flat rates: 14-1310
| Pressure line (transparent) on charge air pipe | disconnect, connect, slacken hose clamp. |
| Connector on pressure switch (S66) | disconnect, connect. |
| Pressure switch (S66) | remove, install, renew seal (138c). |
| Bracket (127) | remove, install. |
| Screw-and-washer assemblies (108) | 10 or 12 off, remove, install, torque 25 Nm. |
| Charge air connecting line (138a) | remove, put on, renew seal (138b). |
| Charge air pipe (138) | remove, attach, renew gasket (106). |
NOTE:
Engines 602.962, 603.960/963/971
Gasket of boost air pipe to cylinder head made of improved material.
PRODUCTION BREAKPOINT: AS OF OCTOBER 1993
| Model | Engine | Engine end no. Manual transmission | Engine end no. Automatic transmission |
|---|---|---|---|
| 124.128/188 | 602.962 | 000000 | 019170 |
| 124.133/193 | 603.960 | - | 049519 |
| 124.333/393 | 603.963 | - | 004191 |
| 140.134 | 603.971 | - | 007455 |