Remove/install front engine mounts and/or engine support - AR22.10-P-1260HX
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 601 in model 124, 201 as of 1.4.85
ENGINE 602 in MODEL 124, 201
ENGINE 603 in MODEL 124, 140
Fig 1: Identifying Front Engine Mount Removal/Install Components - Engine 601 & 602 In Model 124, 201, Engine 603 In Model 124, 140
| Fig. item etc. | Work instructions | ||
|---|---|---|---|
| Arrow | Air intake hose | detach | |
| 16, 17, 18 | Detach fan shroud | and lay over fan | |
| 25a, 36, 40, 45 | Remove engine mount, shield | ||
| *BA22.10-P-1001-01J | |||
| *BA22.10-P-1004-01J | |||
| *BA22.10-P-1010-01J | |||
| *WE58.40-Z-1012-11A | |||
| 6 | Observe different version on left and right. Pay attention to environmental protection regulations for disposal; give the engine mount to the mixed scrap. |
| Number | Designation | Engines 601, 602, 603 in models 124, 140, 201 with hydr.engine mount at the front, except engine 603.913/963 (4 MATIC) | Engine 603.913/963 (4 MATIC) in model 124.2/3 | |
|---|---|---|---|---|
| BA22.10-P-1001-01J | Bolt, front engine mount to body/ front axle carrier | Nm | 25 | 25 |
| BA22.10-P-1004-01J | Bolt, front engine support to engine mount | Nm | 55 | 20 |
| BA22.10-P-1010-01J | Bolt, front engine mount to engine support | Nm | - | 55 |
WORKSHOP EQUIPMENT
| WE58.40-Z-1012-11A | Load regulator (engine hoist), self-locking |