Tightening propeller shaft clamping nut - AR41.10-P-0050-12DA

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Models 140.02/03/1 up to 6/95,140.04 up to 3/93 and 140.050/051 up to 11/91.

PROPELLER SHAFT

Number	Designation		Model 140
BA41.10-P-1003-01A	Clamping nut, propeller shaft	Nm	40

Fig 1: Identifying Open-End Wrench (126 589 00 01 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Tighten propeller shaft clamping nut, ensuring that the rubber boot is properly seated.

Fig 2: Tightening Propeller Shaft Clamping Nut

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.