LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Propeller Shaft - 140 Chassis) >> Testing & Repair >> Remove/install propeller shaft - AR41.10-P-0050DA >> Connecting front propeller shaft to transmission - AR41.10-P-0050-07DA

Connecting front propeller shaft to transmission - AR41.10-P-0050-07DA

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATION PROPELLER SHAFT

Number Designation Model 140
BA41.10-P-1001-01A Self-locking nut, flexible disk to transmission or front propeller shaft M10 Nm -
M12 Nm 60

NOTES Replace self-locking nuts.

Connect front propeller shaft to transmission.

Fig 1: Tightening Front Propeller Shaft Self-Locking Nuts
G05438841Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals