LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1994 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Exhaust System - 140 Chassis) >> General Information >> Notes on installation position and suspension of rear muffler - AH49.10-P-1000-02A

Notes on installation position and suspension of rear muffler - AH49.10-P-1000-02A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT

Suspension at rear right replaced by suspension with red colored coding.

The distance between the rubber hanger and the rear muffler must be at least 32 mm for temperature reasons (arrow).

Fig 1: Identifying Distance Between The Rubber Hanger And The Rear Muffler
G04686496Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

IMPORTANT

The tailpipes must be positioned parallel and with a clearance of at least 10 mm to the rear molding.

Fig 2: Identifying Tailpipes Positioned Parallel And With Clearance
G04686497Courtesy of MERCEDES-BENZ OF NORTH AMERICA.