Removing and installing expansion reservoir - AR47.10-P-8021D
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 140 with CODE (282a) ski bag (through-loading facility)
| Removal, installation | |||
| Risk of explosion from ignition. Risk of poisoning from inhaling and swallowing fuel. Risk of injury as a result of fuel coming into contact with skin and eyes. | No fire, naked flame or smoking. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing when handling fuel. |
AS47.00-Z-0001-01A | |
| If fuel tank is full, pump out about 8 liters of fuel | |||
| 1 | Release catches (arrows) | ||
| 2 | Pull skibag (79) out of skibag mount | ||
| 3 | Remove screws (79/1) | ||
| 4 | Release skibag mount (79/2) from the front mount (79/3) and pull out | ||
| 5 | Disconnect fuel hoses (91/6) from the fuel expansion reservoir (93) | ||
| 6 | Pull out fuel expansion reservoir (94); unclip vent pipes (91/2, 91/3), if necessary | ||
| 7 | Install in the reverse order |