Removing and installing activated charcoal canister - AR47.30-P-8212FB: Notes
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 140 with ENGINE 119, 120
Left-hand illustration model 140, 100-liter fuel tank
Right-hand illustration model 140, 90-liter fuel tank
Model 140
| Removal, installation | |||
| Risk of explosion | Observe accident prevention regulations! | ||
| 1 | Remove rear left inner fender | ra88001400130x | |
| 2 | Disconnect pipes at activated charcoal canister (77) | Pipes (A, D, E) | |
| Connection diagram of evaporative emission control system | Engine 119.97 | AR47.30-P-8212-01EA | |
| Engine 119.98 | AR47.30-P-8212-01EB | ||
| Engine 120.980/981 | AR47.30-P-8212-01FA | ||
| Engine 120.982/983 | AR47.30-P-8212-01FB | ||
| 3 | Remove activated charcoal canister (77) | Release upward | |
| Activated charcoal canister enlarged | Model 140 |
BT47.30-P-0001-01A | |
| 4 | Install in the reverse order |