Removing and installing overflow reservoir - RA20001194540X(20-4540)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Operation no. of operation texts and work units or standard texts and flat rates
20-5411
- Model 124
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Front right wheel (3) take off, fit on. Partition panel (2) below front fender remove, install. Bolts (61) unscrew, screw on. Vacuum hose (65) detach, fit on. Vacuum reservoir (62) remove, install. Nut (63) and bolts (64) unscrew, screw on. Coolant hose (66) detach, fit on. Overflow reservoir (6) remove, install. - B. Model 129
Operation no. of operation texts and work units or standard texts and flat rates
20-5411
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Car drive onto lift platform or over inspection pit. Overflow line (6) of overflow reservoir (1) detach, install. Nuts (2) unscrew from below, screw on. Overflow reservoir (1) take off downward, install.
When removing overflow reservoir (1), protective cap (3) of air admission connection (5) remains next to splash water reservoir (4).Protective cap (3) must be re-fitted when installing. - Model 140
Operation no. of operation texts and work units or standard texts and flat rates
20-5411
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Car drive onto lift platform or over inspection pit. Front engine compartment panel (2) at bottom remove, install. Front bumper (3) remove, install (88-2000). Overflow line (6) of overflow reservoir (1) detach, attach. Nuts (arrows) unscrew, screw on. Overflow reservoir (1) take off, install.