Removing and installing intake air scoop - AR09.10-P-8221D

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

ENGINES 104.941/942/943/944/991/992/994

Model 124, 1st version

Fig 1: Identifying Intake Air Scoop - Model 124, 1St Version

G04678442

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 124, 2nd version

Fig 2: Identifying Intake Air Scoop - Model 124, 2nd Version

G04678443

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 129

Fig 3: Identifying Intake Air Scoop - Model 129

G04678444

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 140

Fig 4: Identifying Intake Air Scoop - Model 140

G04678445

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Model 202

Fig 5: Identifying Intake Air Scoop - Model 202

G04678446

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig. item, etc.	Work instructions
	Remove right headlamp unit, install	Model 124, 2nd version See RI Electrical System III Model 124, Op. no. 82-4730
	Remove radiator trim, install	Model 202 See RI Body Removal and Installation II Model 202, Op. no. 88-4000
4/22	Splash guard	pay attention to installed position
4/4	Intake air scoop	remove