Specified engine oils (service) - overview - BB00.40-P-0223-02A
| For Mercedes-Benz and Smart | |||
|---|---|---|---|
| viscosity classes | sheet 224.1 (passenger-car engines) | BB00.40-P-0224-01A | |
| sheet 224.2 (commercial-vehicle engines) | BB00.40-P-0224-02A | ||
| Single-grade oils | sheet 228.0 | BB00.40-P-0228-00A | |
| sheet 228.2 | BB00.40-P-0228-02A | ||
| Multigrade oils | sheet 226.9 | BB00.40-P-0226-09A | |
| sheet 228.1 | BB00.40-P-0228-01A | ||
| sheet 228.3 | BB00.40-P-0228-03A | ||
| sheet 228.5 | BB00.40-P-0228-05A | ||
| sheet 228.51 | BB00.40-P-0228-51A | ||
| sheet 229.1 | BB00.40-P-0229-01A | ||
| sheet 229.3 | BB00.40-P-0229-03A | ||
| sheet 229.31 | BB00.40-P-0229-31A | ||
| sheet 229.5 | BB00.40-P-0229-05A | ||
| sheet 229.51 | BB00.40-P-0229-51A |
The temperature ranges in the viscosity classes must be observed for the use of the engine oils (see BB00.40-P-0224-01A and BB00.40-P-0224-02A )!
Passenger vehicle engines,
Commercial vehicle engines from the passenger car division,
Single-grade oils are listed in Single-grade engine oils - only to be used in summer.
Multigrade oils are listed in Multigrade engine oils Multigrade engine oils Multigrade engine oils Multigrade engine oils - use possible all year round.
| MB Specifications for Operating Fluids sheet 1 | 226.9 Multi-grade | 228.0/.1 Single/ multi-grade | 226.9229.3 Single/ multi-grade | 229.5 Multi-grade | 229.5 Multi-grade | 229.5 Multi-grade | 229.3 Multi-grade | 229.3229 Multi-grade | 229.5 Multi-grade | 229.5 Multi-grade |
|---|---|---|---|---|---|---|---|---|---|---|
| Gasoline engines | ||||||||||
| M 155 (SLR) | - | - | - | - | - | - | - | • | - | |
| AMG engines except M 155 (SLR) | - | - | - | - | - | - | - | - | •4 .) | - |
| M 111, 137, 272, 273 | - | - | - | - | - | • | • | - | • | - |
| M 112, 113, 134, 135 | - | - | - | - | - | • | • | • | • | • |
| M 122, 275 | - | - | - | - | - | - | • | - | • | - |
| M 160, 160/1, M 285 (Maybach) | - | - | - | - | - | - | - | - | • | - |
| M 166 | - | - | - | - | - | • | • | - | - | - |
| M 266 Turbo, M 271 | - | - | - | - | - | - | • | • | • | • |
| Other M 1xx, M 2xx that are not listed above |
- | - | - | - | - | • | • | - | • | - |
| Diesel engines | ||||||||||
| without particulate filter (DPF) | ||||||||||
| OM660 | - | - | - | • | - | - | - | - | • | - |
| OM 640, 642, 646 in model series 639 OM 646, 647, 648 |
- | - | -/• | • | • | - | • | • | • | • |
| OM611, 612, 613, 628, 639, 668, 664, 665 | - | -/• | -/• | • | • | • | • | • | • | • |
| Other OM 6xx not listed above |
- | -/• | -/• | • | • | • | • | • | • | • |
| with particulate filter (DPF) | ||||||||||
| OM 629, 639, 640, 646, 647, 648, 664, 665 OM 639 in model series 639 and 906 |
- | - | - | - | • | - | - | • | - | • |
| OM 660 (EU3/EU4 not with regulated DPF) |
- | - | - | • | - | - | - | - | • | - |
| Other OM 6xx with DPF not listed above |
- | - | - | - | • | - | - | • | - | • |
| MB Specifications for Operating Fluids sheet 1.) | 226.9 Multi-grade | 228.0/.1 Single/ Multi-grade | 226.9229.3 Single/ Multi-grade | 229.5 Multi-grade | 228.51 ' Multi-grade | 229.1 Multi-grade | 229.3 Multi-grade | 229.31 Multi-grade | 229.5 Multi-grade | 229.51 Multi-grade |
|---|---|---|---|---|---|---|---|---|---|---|
| Commercial vehicles, buses without particulate filter | ||||||||||
| BR 300, 400, 500, 900; OM 457, 460 up to and including Euro 3 | - | ◦/• | ◦/• | • | • | - | - | - | - | - |
| BR 500, 900; OM 457, 460 Euro 4/5 | - | - | ◦/• | • | • | - | - | - | - | - |
| Gas engines | • | - | - | - | • | - | - | - | - | - |
| Commercial vehicles, buses with particulate filter | ||||||||||
| BR 500, 900; OM 457, 460 | - | - | ◦ | ◦ | • | - | - | - | - | - |
This table only serves as an overview!
The detailed maintenance and oil change regulations can be found in the maintenance booklet for the respective vehicle/ major assembly.
• Enable
◦ Can only be used in exceptional cases or under certain operating conditions/in certain applications.
- Must not be used
- Multigrade engine oils Single-grade engine oils Multigrade engine oils Multigrade engine oils
- Use in combination with low-sulfur (S <50 ppm) or sulfur-free (S <10 ppm) fuel! If fuels with sulfur contents of S> 500 ppm are being used, the oil change intervals must be reduced!
- Restriction: Only "Mobil 1 5W-50", SAE 5W-50, is approved!
- Restriction: Only engine oils SAE XW-40 may be used!