Mill off land tips between cylinders - AR01.40-P-9271-01AW
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
INSPECTION DATA OF CRANKCASE
| Number | Designation | Engine 601, 602.91/96, 603.91/96 | ||
|---|---|---|---|---|
| BE01.40-P-1012-02D | Land width and peak-to-valley height between cylinder bores after machining cylinder bores | Land width (M) | mm | 35 |
| Peak-to-valley height (RZ) | mm | 0, 100 | ||
| Fig. see | AR01.40-P-9271-01AW | |||
INSPECTION DATA OF CRANKCASE
| Number | Designation | Engine 603.97 | ||
|---|---|---|---|---|
| BE01.40-P-1012-02D | Land width and peak-to-valley height between cylinder bores after machining cylinder bores | Land width (M) | mm | 35 |
| Peak-to-valley height (RZ) | mm | 0, 100 | ||
| Fig. see | AR01.40-P-9271-01AW | |||
- Mill off land tips between cylinders, observe dimension (M).