Sealing air gallery in cylinder head - RA01001044400X(01-4400)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Preceding work:
Camshaft removed (05-2200) .
Operation no. of operation texts and work units or standard texts and flat rates
| Bore (A) in front of cylinder head (1) and in rear (3) | inspect for specified Ø of 12.00 to 12.04 mm. |
| New cap (4) part no. 000 443 012 001 | knock into bore (A).
NOTE:
If a cylinder head with secondary air injection gallery, connection bore (B), is used for an engine without secondary air injection, the connection bore (B) (Ø 15.10 to 15.12) should be sealed with a cap (5) part no. 104 016 00 33.
|