Mounting vibration damper and propeller shaft in accordance with marking applied - AR41.30-P-0100-01A
| Number | Designation | Model 202 | Model 210 | ||
|---|---|---|---|---|---|
| BA41.10-P-1001-01A | Self-locking nut, flexible disk to transmission or front propeller shaft | M10 | Nm | 40 | 40 |
| M12 | Nm | 60 | 60 | ||
| Number | Designation | Model 170 | Model 208 | ||
|---|---|---|---|---|---|
| BA41.10-P-1001-01A | Self-locking nut, flexible disk to transmission or front propeller shaft | M10 | Nm | 40 | 40 |
| M12 | Nm | 60 | 60 | ||
Observe the various versions for the installed position of the vibration damper relative to the 3-arm flange.
1st. version
When assembling, the arrow indicated on the vibration damper must be directly behind the marking (extended lug) on the propeller shaft flange.
2nd. version
The arrow on the vibration damper points towards the marking (extended lug) on the propeller shaft flange.