Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920E
MODEL 202.07 /08 /18 with CODE (317) D-network cellular telephone (D2B)
Illustrated on model 202 T-model
Fig 1: Identifying Vehicle Interface (Cellular Telephone) Remove/Install Components - Illustrated On Model 202 T-Model
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| 2 | Remove battery | AR54.10-P-0005EA | |
| 3 | Remove side paneling in right rear | AR68.30-P-4780A | |
| 4 | Unscrew screws (2) | ||
| 5 | Unscrew nut (5) | ||
| 6 | Carefully lift bracket (1) with control modules out of wheelhouse recess | ||
| 7 | Unlock connector on CTEL interface (A34/4) and disconnect | ||
| 8 | Loosen sheet metal screws (3) | ||
| 9 | Remove CTEL interface (A34/4) | ||
| 10 | Install in opposite order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |