H1 bulb for fog lamp does not function - AF82.10-P-2013A

MODEL 170, 202, 208, 210

Operation no. of operation texts or standard texts and flat rates

Category	Op. no.	Operation text	Time	Acc. no.	Code
P	023547	REPLACE CONNECTOR COUPLING FOR H1-BULB	006 WU/0.5 hrs	-	-

Damage code	Cause	Remedy
82 123 73	Insufficient contact pressure at ground connection of connector coupling to H1 bulb	Since CW 42/01 a wiring harness assembly is provided especially for repair
	Connector coupling for H1 bulb can be burnt.	1 Replace connector coupling.
		Only separate required connector coupling from assembly wiring harness as required (figure) and replace with Raychem solder connector according to DC repair method

Fig 1: Identifying Wiring Harness Assembly

G04633721

Parts ordering notes

Part no.	Designation	Quantity
A 202 820 75 15	Assembly wiring harness (main headlamp)	1
001 546 86 41	Raychem crimp connector for cable up to 1.5 mm²	3