"Activate code" appears in the radio/navigation control module - AF82.61-P-2000A
MODEL 129, 140, 202, 210 with CODE (351) Auto pilot system (APS)
| |
Cause |
Remedy: |
|
| |
Code is not enabled. |
Enable code as follows: ↓ |
|
| |
|
1 Switch off unit. |
|
| |
|
2 Press and hold keys 1 and 6 at the same time. |
|
| |
|
3 Switch on unit. |
|
| |
|
4 Release keys 1 and 6. |
|
| |
|
5 Enter code number. |
|
| |
|
6 Press volume rotary knob. |
|