Removing and installing tail lamp - AR82.10-P-4905EA
MODEL 129, 202.01 /02 /12 Illustrated on model 202
Fig 1: Identifying Removing And Installing Tail Lamp Components - Model 129, 202.01 /02 /12 Illustrated On Model 202 (1 Of 2)
Fig 2: Identifying Removing And Installing Tail Lamp Components - Model 129, 202.01 /02 /12 Illustrated On Model 202 (2 Of 2)
| Removal, installation | |||
| 1.1 | Remove carpeting in trunk | Model 202 | |
| 2.1 | Remove trim of rear center section | Model 202 | |
| 3.1 | Remove left or right wheelhouse liner | Model 202 | |
| 4 | Unplug electrical connection (40) | ||
| 5 | Release bulb holder (41), take off | ||
| 6 | Unscrew nuts (42) | ||
| 7 | Take off lens (44) to the outside | ||
| 8 | Take off reflector (43) to the inside | ||
| 9 | Install in the reverse order | ||
| 10 | Check for proper function |