Removing and installing GSM 1800 MHz network compensator - AR82.70-P-0010C
MODEL 210.2 with CODE (854) MB cellular telephone
Fig 1: Identifying GSM 1800 MHz Network Compensator Remove/Install Components - Model 210.2 With Code (854)
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | AR54.10-P-1030-07I | |
| *WH58.30-Z-1012-09A | |||
| Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries. | No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 2 | Disconnect ground cable of battery | AR54.10-P-0003A | |
| Notes on battery | All models. | AH54.10-P-0001-01A | |
| 3 | Open cover on right in load compartment | ||
| 4 | Unscrew screws (3) | ||
| 5 | Remove cradle for CD changer (1) | ||
| 5 | Loosen sheet metal screws (5) | ||
| 6 | Release connector on E-network compensator (A28/3) and disconnect | ||
| 7 | Unscrew antenna connections | ||
| 8 | Remove E-network compensator (A28/3) | ||
| 9 | Install in the reverse order |
Commercially available tools
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |