Carry out authorization for TELE AID - AR82.95-P-0011B

MODELS 129, 140, 170, 202, 208, 210, 220 with SIM card for the D2 GSM network 

	Notes regarding the Tele-Aid emergency call system	Models 140, 210	AH82.95-P-0001-01A
	Authorize TELE AID emergency call system ↓ Precondition check list: Emergency call controller programmed (Note VIN No., equipment, vehicle parameters, high and low case orthography) TELE AID service applied for SIM card for emergency call in the card internal reader and functional No further SIM card in the front card reader Vehicle is in the open air (GPS availability)	with SIM card for the D2 GSM network
	LED of the emergency call button must be off (ignition key removed, head unit off, telephone display extinguished)
1	Switch telephone on at the handset
2	Wait 15 seconds
3	Switch telephone off at the handset
4	Wait 15 seconds
5	Switch telephone on at the handset
6	Wait 3 minutes
7	Open the telephone card letter and input the PIN number
8	Press menu 3 x	Telephone settings
9	Confirm with OK
10	Press menu 3 x	PIN code necessary
11	Confirm with OK
12	Change PIN code
13	Confirm with OK
14	Input old PIN
15	Confirm with OK
16	Input new PIN
17	Confirm with OK
18	Repeat new PIN No.
19	Confirm with OK
20	Store export PIN
21	Confirm with OK
22	Press menu 3 x	D2 Private
23	End	Terminate connection