Remove/install electric headlamp range adjustment motor - AR82.10-P-4082B
MODEL 129 with CODE (612) Xenon headlamp unit
| Remove/install | |||
| Risk of death
caused by high voltage levels present at xenon headlamps. Risk of explosion/fire hazard through highly flammable material in the area of damaged xenon bulbs Risk of injury through UV light, hot components on xenon headlamps and glass splinters when xenon bulbs burst Risk of poisoning through inhalation of mercury vapor and swallowing of or skin contact with toxic salts and mercury compounds |
Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off complete lighting system. Wear insulating safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure that the workplace is sufficiently ventilated. | AS82.10-Z-0001-01A | |
| 1 | Remove headlamp reflector | AR82.10-P-2850B | |
| 2 | Remove xenon headlamp ignition module | AR82.10-P-4631C | |
| 3 | Detach electrical connection on electrical headlamp range adjustment motor (E1m1, E2m1) | ||
| 4 | Remove screws (1) and electrical headlamp range adjustment motor (E1m1, E2m1) | ||
| 5 | Install in the reverse order | ||
| 6 | Set zero position of headlamps using HHT | ||
| 7 | Check and correct headlamp adjustment | AP82.10-P-8260A |