Fault Memory
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1996 Mercedes-Benz C36, 1996 Mercedes-Benz C280, 1996 Mercedes-Benz C220, 1995 Mercedes-Benz C36, and 1995 Mercedes-Benz C280. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If during the fault retrieval, "-" is displayed, no fault is output, the electrical system of the PML is in order. The hydraulics then have to be tested.
The control unit is provided with a fault memory and is thus capable of diagnosis. Faults occurring remain stored even when the ignition is switched OFF and the battery is disconnected. The fault memory can be read out using HHT via a test coupling (140 589 14 63 00), see SPECIAL TOOLS under TROUBLE SHOOTING, in the module box. The fault path under investigation is displayed with the fault readout.