Rear Suspension & Axle: Installation
- To install, reverse removal procedure. Bleed brake system and adjust parking brake. On 190E, 300D, 300E, fill differential with 1.2 qts. (1.1L) 90 SAE hypoid gear oil. On 400E, 500E, fill differential with 1.4 qts. (1.3L) 90 SAE hypoid gear oil.
- On all models, reconnect drive shaft coupling to differential flange. Temporarily snug drive shaft intermediate bearing bracket bolts to frame floor. Tighten drive shaft clamping lock nut to 22-30 ft. lbs. (30-40 N.m). Tighten drive shaft intermediate bearing bracket-to-frame bolts to 18 ft. lbs. (25 N.m). Reinstall shielding and exhaust system. Ensure all electrical connections are reconnected. On vehicles with Adaptive Damping Suspension (ADS) or self-leveling suspension, see HYDRAULIC SYSTEM REFILL.
Courtesy of MERCEDES-BENZ OF NORTH AMERICA