LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1993 >> 400E >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Air Bag Restraint System) >> Post-Collision Air Bag Safety Inspection

Post-Collision Air Bag Safety Inspection

WARNING: This page is about a different car, the 1993 Mercedes-Benz 500SEL and 1993 Mercedes-Benz 500E. However, it is still accessible from the selected car via links, so may be relevant.
POST-COLLISION AIR BAG SAFETY INSPECTION

Action Components
Replace After Deployment Air Bag Module(s), ETR Seat Belt Assemblies Which Have Deployed, SRS Control Unit
Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) Any Parts Which Fault Codes Show Are Faulty, Instrument Panel, SRS Mounting Brackets & Location, SRS Wiring Harness
Comments DO NOT attempt SRS wiring harness repairs.