LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1993 >> 400E >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Testing >> Hazard Warning Switch Test

Hazard Warning Switch Test

  1. Remove hazard switch. See HAZARD WARNING SWITCH under REMOVAL & INSTALLATION. With switch in normal position, continuity should exist between terminals No. 15 and 49, and between terminals No. 31 and 58 (for bulb illumination).
  2. With switch in hazard flashing position, continuity should exist between terminals No. 30 and 49, and between terminals No. 49A, 49R, 49L and 31. Terminal No. 30 is input voltage terminal when switch is engaged.
scientia non olet · About LEMON Manuals