LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1993 >> 300SL Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control -- 129 Chassis >> Testing & Repair >> Removing and installing stationary heater - AR83.70-P-5302C >> Bleeding coolant circuit after installing stationary heater - AR83.70-P-5302-01C

Bleeding coolant circuit after installing stationary heater - AR83.70-P-5302-01C

AR83.70-P-5302-01C  Bleeding coolant circuit after installing stationary heater Model 129 as of 01.06.97 with stationary heater  
DANGER Fuel vapors present an explosion hazard  . Combustion gases are toxic  when inhaled. Heater can cause severe burns  during and after operation. Do not start up or operate stationary heaters, auxiliary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. &.2.(AS83.70-Z-0002-01A)
DANGER Danger  of severe burns to skin and eyes from hot coolant spewing out. Coolant is toxic  when swallowed Open cooling system only when coolant temperature is below 90°C. Open cover slowly and reduce pressure. Do not fill beverage containers with coolant. Wear protective gloves, protective clothing and protective goggles. AS20.00-Z-0001-01A