Correcting oil level in air conditioning following repair or slow refrigerant loss - AR83.30-P-5251C

MODEL 129 with CODE (580) Air conditioning or, for USA, Tempmatic with CODE (581a) Air conditioning (automatic) 

A/C compressor 10PA17 

	Perform work quickly, compressor oil is hydroscopic When evacuating refrigerant add the quantity of compressor oil removed from the refrigerant circuit when recharging the air conditioner.
1	In the event of refrigerant loss < 400 g (no leakage noted) do not add compressor oil ↓
	Perform leakage test	See SI83/85
2	In the event of refrigerant loss > 400 g (leakage noted) add new compressor oil and also ↓		*BF83.55-P-1009-01A
	replace fluid reservoir	with air conditioning or for USA with Tempmatic Code 580	ra83001290540x
		with air conditioning (automatic) code (581a)	AR83.30-P-6520C
3	Switch on air conditioning and allow engine to idle for approx. 4 minutes	Allow temperature dials to catch in blue field or set automatic air conditioning to " Lo". Blower to max.
4	Check air conditioning for proper function	Air outlet temperature at center nozzle should not be less than approx. + 5°C, if necessary ↓ replace evaporator temperature sensor (B10/6)

A/C COMPRESSOR