Removing and installing blower motor for control module box - AR54.20-P-2351CS
MODEL 129 as of 1.9.95
| Removal, installation | |||
| 1 | Remove cover in engine compartment on right | ||
| 2 | Remove dust filter | ||
| 3 | Unclip hose (1) from control module box blower motor (M2/2) and unclip from air intake housing and remove | ||
| 4 | Unclip heated window thermo valve (2) from air intake housing | ||
| 5 | Unscrew screws (3) | ||
| 6 | Remove control module box blower motor (M2/2) together with protective housing (4) from control module box | ||
| 7 | Unclip electrical connector from protective housing (4) | ||
| 8 | Remove control module box blower motor (M2/2) with protective housing (4) from component compartment | ||
| 9 | Install in the reverse order |