Checking positioning element travel - AR82.10-P-4012-02A
Model 129, 168, 170, 202, 210 except
TEST AND ADJUSTMENT DATA, EXTERIOR LIGHTS
| Number | Designation | Model 202 except |
Model 210 except |
||
|---|---|---|---|---|---|
| BE82.10-P-1002-01A | Travel of positioning element for headlamp range adjustment | Position 0 | mm | 0.0 | 0.0 |
| Position 1 | mm | 0.95 | 0.95 | ||
| Position 2 | mm | 1.7 | 1.7 | ||
| Position 3 | mm | 3.0 | 3.0 | ||
TEST AND ADJUSTMENT DATA, EXTERIOR LIGHTS
| Number | Designation | Model 170 except |
||
|---|---|---|---|---|
| BE82.10-P-1002-01A | Travel of positioning element for headlamp range adjustment | Position 0 | mm | 0.0 |
| Position 1 | mm | 0.95 | ||
| Position 2 | mm | 1,7 | ||
| Position 3 | mm | 3.0 | ||
TEST AND ADJUSTMENT DATA, EXTERIOR LIGHTS
| Number | Designation | Model 168 except |
||
|---|---|---|---|---|
| BE82.10-P-1002-01C | Travel of positioning element for headlamp range adjustment | Position 0 | mm | 0.0 |
| Position 1 | mm | 0.95 | ||
| Position 2 | mm | 1,7 | ||
| Position 3 | mm | 3.0 | ||
TEST AND ADJUSTMENT DATA, EXTERIOR LIGHTS
| Number | Designation | Model 129 | ||
|---|---|---|---|---|
| BE82.10-P-1002-01D | Travel of positioning element for headlamp range adjustment | Position 0 | mm | 0.0 |
| Position 1 | mm | 0.95 | ||
| Position 2 | mm | 1,7 | ||
| Position 3 | mm | 3.0 | ||
- Remove positioning element.
- Attach vacuum line to positioning element.
- Start engine and move headlamp range adjuster from position 0 to position 3.
- Measure piston travel (a) on positioning element. If the specified values are not achieved, replace positioning element.