Testing and repair work: Passenger cars: Suspension - AR32.00-Z-9140AA
MODEL 140
| Removing and installing front spring | MODEL 140, 170, 202, 208, 210 | AR32.20-P-0200B | |
| Removing and installing rear spring | MODEL 129, 140, 170, 202, 208, 210 | AR32.20-P-0230A | |
| Remove/install torsion bar on front axle | MODEL 140 | AR32.20-P-0300B | |
| Removing and installing torsion bar on rear axle | MODEL 140 | AR32.20-P-0315B | |
| Removing and installing front shock absorber | MODEL 140, 170, 202, 208, 210 | AR32.25-P-0105A | |
| Remove/install rear shock absorber | MODEL 210 ... 129, 140, 170, 202, 203, 208, 209, | AR32.25-P-0110A | |
| Checking shock absorber | MODEL 203, 208 129, 140, 163, 164, 168, 170, 202,, 209, 210, 211, 230, 251, 414 ... | AR32.25-P-0121A | |
| Rear strut removal and installation | MODEL 140, 202, 203, 208, 210 ... | AR32.25-P-1016A | |
| Checking hydraulic pump | MODEL 140, 202, 203, 208, 210 ... | AR32.30-P-0510A | |
| Rear suspension-control module - Operation check | MODEL 140, 202, 203, 208, 210 ... | AR32.30-P-0520A | |
| Testing pressure at rear axle level controller | MODEL 140, 202, 203, 208, 210 ... | AR32.30-P-0530A | |
| Rear hydraulic suspension pressure accumulator, removal and installation | MODEL 140, 202, 203, 208, 210 ... | AR32.30-P-0620A | |
| Emptying and filling pressure oil system | MODEL 140, 202, 203, 208, 210 ... | AR32.30-P-0630A | |
| Rear suspension-control module, removal and installation | MODEL 140, 202, 203, 208, 210 ... | AR32.30-P-0670A | |
| Removing and installing front shock absorber/ADS | MODEL 140 as of 1.6.94, 210 with CODE (217a) Level control at rear axle with ADS | AR32.32-P-0605A | |
| Removing and installing rear damper valves | MODEL 140 as of 1.6.94, 210 with CODE (217a) Level control at rear axle with ADS | AR32.32-P-0680A |