Replacing rear crankshaft radial seal - AR03.20-P-3063AO

ENGINE 120 

Fig 1: Identifying Radial Seal, Driven Plate And Ring Gear

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removing, installing
1	Remove rear crankshaft radial seal (15)	Do not damage crankshaft and mounting hole for the radial seal. Use a clean cloth as a base.
2	Install rear crankshaft radial seal (15)		AR03.20-P-3063-01AO
			Figure
		Pay attention to installation notes for crankshaft radial seal.	AH03.20-P-0001-01AO
3	Install in the reverse order
4	Inspect rear of engine for leaks		AR01.40-P-8913-01AO

Fig 2: Identifying Installation Tool (117 589 00 43 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.