Removal and installation of cover below instrument panel - RA68001400150X(68-150)
A. Driver's side
| Air grate (1) | push out with plastic wedge. |
| Screws (2 and 3) | screw out, hold cover down for access. |
| Screw (4) | screw out. |
| Screws (5, 6 and 7) | screw out (8 mm). |
| Nut (8) | screw off (10 mm). |
| Cover (9) | pull down and remove. |
| Reinstall | in opposite order. |
Installation note
When installing push cover (9) onto air duct (arrows).
B. Passenger side
| Glove compartment | remove (Removal and installation of the glove compartment ). |
| Screws (arrows) | screw out (8 mm, 4 each). |
| Air grate (2) | press out with plastic wedge. |
| Screw (3) | screw out (8 mm). |
| Screws (4 and 5) | screw out (8 mm). |
| Cover (1) | pull down on front pillar and remove by extending attachment hook on instrument panel. |
Reinstall in opposite order.
Installation note
When installing push cover (1) onto air duct while simultaneously inserting attachment hook on instrument panel (arrows).