Installing upper bracket for jacket tube - AR46.10-P-0600-01A
TEST VALUES - JACKET TUBE
| Number | Designation | Model 129 | Model 140 | |
|---|---|---|---|---|
| BE46.10-P-1001-03A | Dimension "a" on upper bracket on jacket tube | mm | 21.5+0.5 | 21.5+0.5 |
| Refer to illustration | AR46.10-P-0600-01A | AR46.10-P-0600-01A | ||
| Number | Designation | Model 129 | Model 140 | |
|---|---|---|---|---|
| BA46.10-P-1006-03A | Clamping screw of upper bracket on jacket tube | Nm | 5 | 5 |
Installation
- Mount bracket (85) as shown and turn so that the two attachment holes form an angle of 90° to the installed position of the jacket tube unit.
- Adjust dimension "a".
Tighten bolt (85a).