Activating Steering Angle Sensor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1995 Mercedes-Benz SL600, 1995 Mercedes-Benz SL500, 1995 Mercedes-Benz SL320, 1994 Mercedes-Benz SL600, and 1994 Mercedes-Benz SL500. However, it is still accessible from the selected car via links, so may be relevant.
In the event that power supply is interrupted to steering angel sensor PML control module switches to basic function mode. Malfunction Indicator Light (MIL) in instrument cluster may illuminate. At this point steering angle sensor must be reactivated.
To activate steering angle sensor follow listed steps:
- Start engine and allow to idle.
- Turn steering wheel from lock to lock.
- MIL should go out. If MIL remains on, see SELF-DIAGNOSTIC SYSTEM (CHAPTER 11) .