Removing and installing outside temperature sensor - AR54.30-P-6341CT

MODEL 129 as of 1.9.95 

Fig 1: Identifying Outside Temperature Sensor

	Removal, installation
1	Remove engine compartment paneling		AR61.20-P-1105AB
2	Pull outside temperature sensor (B14) out of mounting hole.
3	Disconnect outside temperature sensor (B14) from wiring harness (1)	The wiring harness from the temperature sensor to the instrument cluster is installed without connector. If the wiring harness is defective the back and insulate (do not remove).
4	Install in the reverse order