LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1992 >> 300SD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crank Assembly - 140 Chassis >> Testing & Repair >> Replacing ring gear of driven plate - AR03.30-P-8313AO

Replacing ring gear of driven plate - AR03.30-P-8313AO

ENGINE 120 

Fig 1: Identifying Ring Gear Of Driven Plate
G04677048Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig. item, etc. Work instructions    
2 Ring gear IMPORTANT Removing: driven plates and ring gear are individually balanced and can be replaced without balancing.
IMPORTANTInstallation  : the ring gear (2) should be installed in such a way that the 3.5 mm ø holes (arrows) in the ring gear (2) and in the driven plates (7, 8) have the same angle position otherwise proper operation of the ignition is not assured.		  
scientia non olet · About LEMON Manuals