LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1992 >> 300CE >> Repair and Diagnosis >> Brakes >> Traction Control >> Brakes - 300E, 300CE & 300TE >> Removal & Installation >> Hydraulic Unit >> Removal

Hydraulic Unit: Removal

With ignition off, disconnect negative battery cable. Remove hydraulic unit lines, and plug openings. Remove hydraulic unit mounting bolt and cover. Detach pump motor ground strap. Remove 12-pin plug socket. Remove mounting nuts and hydraulic unit.

CAUTION: DO NOT loosen sealed center bolt or 2 hex socket bolts next to cover and brakelines.
scientia non olet · About LEMON Manuals