LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1991 >> 350SD >> Repair and Diagnosis >> Brakes >> Traction Control >> 1983-88 & 1991 Brakes - Anti-Lock Brake System - 190E, 190D, 240D, 260E, 300CD, 300CE, 300E, 300D, 300SD, 300SDL, 300SEL, 300TD, 300TE, 350SD, 350SDL, 350SL, 380SE, 380SEC, 380SEL, 380SL, 420SEL, 500SEC, 500SEL, 560SEC, 560SEL, 560SL >> Removal & Installation >> Hydraulic Unit >> Installation

Hydraulic Unit: Installation

  1. To install, reverse removal procedure. Connect brake lines to hydraulic unit fittings. Brake line identification codes are as follows: Code "V" is line from master cylinder to front brake circuit. Code "H" is line from master cylinder to rear brake circuit.
  2. Code "L" is line from hydraulic unit to left front brake. Code "R" is line from hydraulic unit to right front brake. Code "H" is line from unit to rear brakes. Bleed brake system. Check for leaks.
scientia non olet · About LEMON Manuals