Removing and installing cellular telephone interface - AR82.70-P-7379EEE
MODEL 129 as of 1.7.00 with CODE (854) MB cellular telephone
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| Risk of explosion from explosive gas. Risk of poisoning and caustic burns from swallowing battery electrolyte. Risk of injury from caustic burns to eyes and skin from battery electrolyte or from handling damaged lead acid batteries. | No fire, sparks, naked flames or smoking. Wear acid-protective gloves, clothing and eye protection. Pour battery electrolyte only into suitable and appropriately marked containers. | AS54.10-Z-0001-01A | |
| 2 | Disconnect ground cable of battery | AR54.10-P-0003A | |
| Notes on battery | All models. | AH54.10-P-0001-01A | |
| 3 | Remove paneling on left side in trunk | ||
| 4 | Unscrew nuts (2) and screws (3) | ||
| 5 | Carefully lift cradle with control module out of spare wheel recess | ||
| 6.1 | Disconnect connection lead from telephone interface (A34/4) | ||
| 6.2 | Disconnect connection lead on E-network compensator (A28/3) | ||
| 7 | Remove telephone interface (A34/4) from cradle (1) by unscrewing 2 screws (4) | ||
| 8 | Install in the reverse order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |