Removing and installing rubber of wiper blade - AR82.30-P-6250E

MODEL 129, 202 

Fig 1: Identifying Rubber Of Wiper Blade Components

	Removal
1	Remove wiper blade (1)	See Owner's Manual .
2	Push back retaining springs (2)	Push back from closed side of rubber blade.
3	Pull retaining springs fully out of rubber
4	Detach rubber (3) at the retaining bars (4)
	Installation
5	Attach rubber (3)	Do not lock inner retaining bar (4) into recess of rubber at this stage.
6	Insert retaining springs (2)	Insert from open side of rubber blade. Ensure that arch points towards windshield.
7	Coat rubber (3) on the closed side with soapy water	Retaining bar (4) and retaining springs (2) thus engage more easily.
8	Insert retaining springs (2) into recess
9	Press inner retaining bar (4) into recess
10	Install wiper blade