Removing and installing bulb of center high-mounted stop lamp - AR82.10-P-5385A

MODEL 129 up to 30.5.96 Center high-mounted stop lamp, incandescent bulb version

Fig 1: Identifying Bulb Of Center High-Mounted Stop Lamp Components

OPERATION NO. OF OPERATION TEXTS OR OF STANDARD TEXTS AND FLAT RATES

Operation no.

Operation text

	Removal, installation
1	Remove paneling on trunk lid
2	Remove plug (1)	For this purpose, turn plug (1) counter clockwise and remove.
3	Remove cover (3)	For this purpose, turn plug (2) counter clockwise and cover (3) remove.
4	Unclip incandescent bulb carrier (5) from reflector	Installation : The retaining lugs (4) must catch audibly.
5	Disconnect connector from incandescent bulb carrier (5)
6	Remove bulb (6)
7	Install in opposite order
8	Check function