Removing and installing drive for seat height adjustment - AR91.29-P-1421A

MODEL 129 for front seat height adjustment drive 

Fig 1: Identifying Seat Height Components

	Removal, installation
1	Remove driver's seat		ra91001290100x
2	Unhook seat frame paneling (1) at top
3	Remove mounting bridge (2)
4	Unscrew screws (3) and remove cover
5	Expose leads	Remove cable straps, open clips and disconnect connector.
6	Remove motor (4) together with gear (5)	Unscrew screws (arrows) from motor (4), remove plastic bracket, unscrew screws from gear (5) and remove motor (4) with gear (5) and drive shaft. Installation  : Before installing motor (4) manually turn both gears (5) to upper-most final position. Installation  : Insert motor (4) with rubber mount and insert drive shaft.
7	Remove gear (5) from motor drive shaft (4)	Installation  : Skip this step.
8	Install in the reverse order
9	Carry out operational check