Removing and installing molding on side window - AR88.85-P-3000C

MODEL 129 

Fig 1: Identifying Molding On Side Window Components

	Removal, installation
1	Remove glass roof	See Owner's Manual
2	Remove molding (1) by unscrewing screws (2)	Screws (2), 3 each
3	Pull off rubber seal (3) in area of door cutout	Installation  : Coat rubber seal (3) with soap solution
4	Unscrew screws (5) on molding (4) and unclip molding (4) in area of side window with installation wedge (6)		Fig 2
5	Remove molding (7) by unscrewing screws (8)	Installation  : Install molding (7) in previous position or adapt to door window
6	Install in opposite order

Fig 2: Identifying Installation Wedge (110 589 03 59 00)