Removing and installing front door infrared remote control receiver - AR80.30-P-4305C
MODEL 129 up to 30.11.94
MODEL 129 as of 1.6.96 up to 31.5.97 with CODE (491) USA version
| Removal, installation | |||
| 1 | Pull gasket (1) approx. 300 mm out of guide | ||
| 2 | Unscrew Allen screw (2) 4 mm | ||
| 3 | Turn key in lock cylinder approx. 90° | ||
| 4 | Pull out lock cylinder with IR receiver (A26/1, A26/2) or with IRC function indicator (E34). | ||
| 5 | Remove two retaining pins (3) with punch (1.8 mm Ø) | ||
| 6 | Remove IR receiver (A26/1, A26/2) or RCL function indicator (E34) | ||
| 7 | Check gasket, replace if necessary | ||
| 8 | Reinstall in opposite order |