LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1990 >> 300SL Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Electrical System - Body -- 129 Chassis >> Maintenance >> Check and correct headlamp adjustment - AP82.10-P-8260A >> Set low beam - AP82.10-P-8260-01A

Set low beam - AP82.10-P-8260-01A

  1. When setting the height the light-dark boundary must have the same coverage as the horizontal broken line (4) of the device. When lateral adjustment is taking place, the bent line (5) must lie below the central mark (6) and start at the horizontal division mark (4).
    Fig 1: Identifying Horizontal Broken Line, Central Mark And Horizontal Division Mark
    G04688642
scientia non olet · About LEMON Manuals