Removing and installing front axle headlamp range adjustment sensor - AR82.10-P-4083C
MODEL 129 with CODE (612b) Xenon headlamp unit
| Removing, installing | |||
| 1 | Remove bottom engine compartment paneling | ||
| 2 | Unhook connecting rod (2) from front axle sensor (A52) | ||
| 3 | Disconnect connector (1) from front axle sensor (A52) | ||
| 4 | Unscrew screws (3) and remove front axle sensor (A52) | ||
| 5 | Install in the reverse order | ||
| 6 | Set zero position of xenon headlamps with HHT | ||
| 7 | Check and correct headlamp adjustment | AP82.10-P-8260A |