Removing and installing TELE AID emergency call system control module - AR82.95-P-0005C: Notes
MODEL 129 with CODE (347) TELE AID emergency call system (D2B)
European version
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| 2 | Disconnect ground lead from battery | ||
| 3 | Remove paneling below right rear seat | ||
| 4 | Disconnect connection leads and antenna lead from CTEL transmitter and receiver (A35) | ||
| 5 | Unscrew nuts (5) | ||
| 6 | Carefully lift mount (4) with control module | ||
| 7 | Pull connection lead and D2B connection lead off of TELE AID control module (A35/8) | AR82.95-P-0005-01A | |
| 8 | Unscrew TELE AID control module (A35/8) from mount (1) with 4 screws (6) and pull out | ||
| 9 | Install in opposite order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |