LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1986 >> 560SL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 1986 Automatic Transmission Servicing - 190D, 300D, 300SDL, 420SEL, 560SEC, 560SEL & 560SL >> Adjustments >> Neutral Safety Switch

Neutral Safety Switch

  1. Neutral safety switch is located behind transmission selector lever on transmission. Loosen neutral safety switch attaching screws. Ensure transmission selector lever is in Neutral position.
  2. Insert a 5/32" (4 mm) drill through select lever adjustment hole and into neutral safety switch housing. Tighten screws and remove drill. Ensure vehicle starts in "P" and "N" positions only.
scientia non olet · About LEMON Manuals