Brake Pads: Remove & Replace
WARNING: This page is about the 300E Automatic, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable).
Includes: Repack Wheel Bearings (where applicable).
DOES NOT include refinishing.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| All | 1.8 | B | ||
| Front | 1.0 | B | ||
| Rear | 1.0 | B | ||
| Combination Procedure: CALIPER: Overhaul: Includes: Bleed System. | ||||
| Dual Piston,w/ABS,One | 1.1 | B | ||
| Dual Piston,w/o ABS,One | 0.7 | B | ||
| Four Piston,w/ABS,One | 1.8 | B | ||
| Four Piston,w/o ABS,One | 1.4 | B | ||
| Single Piston,w/ABS,One | 0.9 | B | ||
| Single Piston,w/o ABS,One | 0.5 | B | ||
| Combination Procedure: CALIPER: Replace: Includes: Bleed System. | ||||
| One,w/ABS | 0.7 | B | ||
| One,w/o ABS | 0.3 | B | ||
| Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace: | ||||
| Front | 0.4 | B | ||
| Rear | 0.7 | B | ||
| Combination Procedure: WHEEL BEARING: Repack: | ||||
| Front,Both Sides | 2.0 | B | ||