Drive Belt TENSIONER: Remove & Replace
WARNING: This page is about the 190E 102.983, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4, Serpentine Type | 1.4 | D | ||
| V-Belt Type | 0.7 | D | ||
| Combination Procedure: DRIVE BELT TENSIONER BEARING: Replace: | ||||
| 0.2 | D | |||
| Combination Procedure: SUPPORT BRACKET: Replace: | ||||
| 0.2 | B | |||